Unmitigated Garment Disaster- Part 4 of 5

The finished top (back side, wool-side out)...

 

...and the front.

 

The back side (wool-side out), as modeled by my daughter, H-2...

 

...and, again, here, with the silk side out.

 

You can see that both the long garment sides...

 ...and the 'deliberate layout design'...

...were rubbish...

 

...and that the straps are uneven and too narrow.



Question: "Could this top fit me as designed?"

(Hint: this daughter is 3 garment sizes smaller than I am!)

Just look at the horrible way it fits! Shudder. 

 

Now can you see what I'm talking about?

Between my poor choice of colors...

...(why, oh why did I ever think that I would wear something in these shades?)...

...and the truly unflattering fit (even on my tiny, beautiful daughter)...

...this garment is not fit for human wear...

...unless...?????

Next time: A solution is found...

...(but it's not what you think!)

Unmitigated Garment Disaster- Part 3 of 5

The (dry) layout on the front side.

 

...and...after wetting it down.

 

With only one layer of wool roving plus a layer of silk gauze...



...I'm expecting a lot of shrinkage. 

Once the piece is wet and soapy...

...I roll it up and wrap it in thin painter's plastic...

 

...then tie it with narrow lengths cut from a nylon stocking...

...bundle it up in a towel, and pop it into my tumble dryer.

 

Checking and readjusting the piece, partway through felting.

 

The nubby texture on the silk side of the finished nuno garment.



Using the dryer felt method...

...I roll up, tie, and wrap up the garment...

...then tumble it on high heat for several 15-minute sessions...

...unrolling and checking it until it is fully felted.

Except for a small area or two where I wasn't 100% happy with my layout coverage...

...I think the garment did well enough in the dryer.

Next time: You'll finally get to see why I call this garment a disaster! :(

Unmitigated Garment Disaster- Part 2 of 5

After flipping the piece to side two.



Pulling back the thick painter's plastic resist to reveal the silk side of side one. 

 

Adding a layer of trimmed-into-shape silk gauze...

 

...and connecting the front and back by folding roving over from side one to side two.

 

Laying out additional roving...

 

...in a more deliberate pattern this time...

 

...for the front of the garment.

 

The finished layout on side two.

 

After (rather awkwardly) flipping the piece from side one to side two...

...I added a layer of silk gauze to the 'naked' resist.

I then folded over the 'rays' of roving along the garment edges...

...from side one to side two (connecting them in the process).

More wool roving came next...

...but in a more thought-out pattern this time...

...creating the garment front.

Next time: actual felting begins.

Unmitigated Garment Disaster- Part 1 of 5

Altering a sleeveless top resist for more length and 'swing' at the bottom...



...and defining the neckline with permanent marker. 

 

Adding a layer of silk gauze...

 

...and trimming it into shape at the top.

 

Beginning the layout with dark blue roving along the side seams...

 

...and filling in with roving in shades of lavender...

 

...blue and pink.

 

Wetting out side one.

 

There's no way to 'sugar coat' it...

...I have a love-hate relationship with garment felting.

I think the sheer size of the required resists...

...(for seamless projects, anyway)...

...is often enough to stop me before I start!

Inspired by my friend, Llinda's beautiful nuno top (which actually fit me!)...

...I decided to 'screw my courage to the sticking place' and try again! :)

Using a copy of her resist pattern as my starting point...

...I added long, curving sides at the hem...

...and traced it onto a thick sheet of painter's plastic.

With permanent marker, I outlined the curvature of the neckline and straps...

...on both the front and back sides.

Next, I covered the resist with a piece of silk gauze...

...and trimmed it into shape.

Beginning with dark blue roving on the sides of the piece...

...I completed side one with stripes of variegated roving in shades of blue, pink and lavender.

Next time: the layout continues on side two.

Experimental "Hippie" Purse- Part 2 of 2

The bag front (closed)...

 

...and back (opened).

 

Trying out a piece of leather for color.

 

Do I prefer the suede or the firm leather side 'front-and-center' this time?



Lining the inner 'cell phone pocket' with print fabric from my stash.

 

Notice how some of the pieces of yarn on the bag body...

...can be pulled through holes in the flap when the purse is closed?

 

Adding a machine-stitched seam at the bag 'hinge'.

 

I think this bag is colorful and wild and a little unkempt...

...like the hippie fashions of the 60's! :)

 

Because the pieces of yarn were initially quite long...

...I felt the need to wrap them in plastic wrap, plus duct tape...

...or fold them carefully and put a thin layer of plastic between 'them' and the roving...

...to keep them from 'felting in' as I worked.

If I were to do it again, I would avoid the tape...

...since some of the yarn became a bit ragged-looking...

...from all of my pulling and tugging.

Since it was an experiment, and I wasn't sure 'where' I was headed with the bits of yarn...

...I found that I needed to shorten them on the finished bag...

...so I merely knotted them on themselves in a crude way.

The circles of 'felt applique' and blanket stitching...

...give a homespun look to the purse...

...and add to its vintage 'feel'.

To help secure the flap, I stitched a seam at the top...

...(so it folds over the bag easily and evenly)...

and attached a large metal snap as a closure.

Experimental "Hippie" Purse- Part 1 of 2

Beautiful handspun yarn from my friend, Kelly.

 

Laying out Bluefaced Leicester roving.

 

Adding duct-tape-covered, plastic-wrapped sections of yarn to the bag body...

 

...and adding some with only thin plastic layers between them...

...to the flap of the bag.



Covering the entire piece in roving...

...but leaving an open resist at the flap end.

 

The bag back, mid-felting.

 

Sewing on cut-out circles of felt...

...using lengths of wool yarn in wild colors.

 

Blanket-stitching around the cut-out holes and around the edge of the flap.

 

It all started with a box of glorious handspun yarn...

...and a bit of extra time on my hands during a workshop. :)

I decided to try another open-resist purse (similar to this one.)

...using pieces of yarn as the embellishment, instead of 'dreads'.

When I had partially felted the bag...

...I trimmed the flap and did a 'purse-ectomy'...

...cutting out holes and then re-attaching them (in new places!) with wool yarn.

Next time: the finished bag (after final felting)...

...with a short, suede-side-out leather strap.